Bosch 12 amps 8-1/2 in. Corded Sliding Miter Saw Tool Only

The CM8S 8-1/2 In. single bevel sliding compound miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighs only 37 pounds. These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports. large easy to read miter and bevel scales. and detent system provides quick and accurate cuts. The CM8S also has the same crosscut capacity (12-1/4 In.) as a 10 In. miter saw. at 30% lighter weight.

• Brand Name: Bosch
• Diameter: 8-1/2 in.
• Corded or Cordless: Corded
• Brushless: No
• Amps: 12 amps
• Maximum Speed: 5.600 rpm
• Electric Brake: Yes
• Dust Collection: Yes
• Width: 18 in.
• Depth of Cut at 45 Degrees: 3-3/4 in.
• Depth of Cut at 90 Degrees: 12 in.
• Cord Length: 6 ft.
• Arbor Size: 5/8 in.
• Laser Guide: No
• Maximum Degree Miter Cuts Left: 52 deg
• Maximum Degree Bevel Cuts Right: 2 deg
• Maximum Degree Miter Cuts Right: 60 deg
• Maximum Degree Bevel Cuts Left: 47 deg
• Height: 18 in.
• Kit or Tool Only: Tool Only
• No
• Yes
• 3 HP
• Certifications: UL Listed
• 18 in.
• Bare Tool
• Product Type: Sliding Miter Saw
• Bevel Type: Single
• Tool Length: 32 in.
• Tool Weight: 37 lb
• Bevel Angle Range: -2 to 47 deg
• Bevel Stops: 0 . 22.5. 33.9. 45 deg
• Crown Molding Angled Against Fence: 3-1/2 in.
• Height of Table from Base Feet to Table Surface: 2.44 In.
• Max. Base Molding Against Fence: 2-3/4 In.
• Max. Crown Molding (38 deg Spring) Angled Against: 3-1/2 In.
• Max. Crown Molding (45 deg Spring) Angled Against: 3-3/4 In.
• Max. Cut Capacity – 0 deg Miter 0 deg Bevel: 2.75 In. x 12-1/4 In.
• Max. Cut Capacity – 0 deg Miter 45 deg Left Bevel: 1-1/2 In. x 12-1/4 In.
• Max. Cut Capacity – 0 deg Miter 45 deg Right Bevel: Not possible
• Max. Cut Capacity – 45 deg Miter 0 deg Bevel: 2.75 In. x 8 In.
• Max. Cut Capacity – 45 deg Miter 45 deg Left Bevel: 1-1/2 In. x 8 In.
• Max. Cut Capacity – 45 deg Miter 45 deg Right Beve: Not possible
• Miter Angle Range: 52 deg Left. 60 deg Right
• Miter Detents: 0. 15. 22.5. 31.6. 45. (Left/Right) 60 deg . (Right)
• Miter Positive Stops: 0. 15. 22.5. 31.6. 45 (Left/Right). 60 deg (Right)
• Voltage: 120V