Holly-Tone Evergreen & Azalea Plant Food, 4-3-4, shop lawn & plant protection items

Highlights:

• 36 lbs.
• Analysis: 4-3-4
• For all acid loving plants including azaleas, rhododendrons, camellias, hydrangeas and evergreens
• Promotes bigger blooms and deeper green foliage
• Approved for organic gardening
• All natural
• Complex blend of 100% natural organics to provide complete & balanced feeding
• Enhanced with Bio-tone beneficial microbes
• Long-lasting, slow release. Won??t burn or leach away
• Environmentally safe. No sludges, hazardous or toxic ingredients
• Bagged

Directions:

For New Plantings:

Dig a hole twice as wide and the same depth as the root ball so that roots can spread naturally. Remove 1/3 of the soil and replace it with compost, peat moss or humus. Mix 1 cup of Holly-tone into amended soil. Place the plant in the hole so that it sits at the same depth it was previously growing (use soil mark on the trunk as a guide). Fill the hole halfway with amended soil. Pack the soil firmly, soak it with water, and allow it to settle. Finish filling hole leaving the top two inches loose for easy absorption of water. Make slight depression around the plant to help hold water. Add mulch to help conserve water, slow down evaporation, and control weeds. Keep well watered until plant is established.

For Established Plants:

Feed acid-loving plants twice yearly – Spring and Fall. Use half the recommended rate in the Fall application. If the area to be fed is mulched, it is preferable to remove the mulch, feed and then restore the mulch on top of the plant food. If this is not possible, double all recommended feeding rates.

Trees:

Sprinkle 1 lb. (3 cups) per inch of trunk diameter around drip line of plant (area under and slightly beyond branch spread). Triple the quantity for diameters 3″ and over. For larger trees, make a series of holes under the branch spread starting 1/3 of the distance out from the trunk and extending a similar distance beyond the branch line. Holes should be 2-3″ in diameter, 2-3′ apart, and 12-18″ deep. Divide the Holly-tone evenly among the holes and fill the remainder with soil. Water thoroughly.

Shrubs:

Sprinkle 1 cup of Holly-tone per foot of branch spread (diameter) around the drip line of the plant (area under and slightly beyond branch spread). Double the quantity if branch spread is 3 feet or larger.

Garden Beds:

For new beds, mix 10 lbs. of Holly-tone per 100 sq. ft. into the top 4 inches of soil. For established beds, mix 5 lbs. per 100 sq. ft.

Potted Plants:

Mix one part Holly-tone to 30 parts potting soil when planting. Feed established plants 1 teaspoon of Holly-tone for each 4 inches of pot diameter.