Victor M9012 Sonic Spike Mole & Gopher Repeller. 2-Pack

Safely send moles and gophers scurrying from your yard unharmed with this Victor Sonic Spike. When placed in the ground and activated. sonic pulses penetrate the soil. emitting a sound which is highly irritating to moles and gophers who are virtually blind and overly sensitive to sound and vibrations. Climate permitting. leave the sonic mole and gopher repeller in the ground to repel new generations of pests.

• 2 Pack
• Easy-to-use removable battery chamber
• Will not harm pets
• Sonic pulse emitted every 30 seconds
• Spike operates in a circular pattern. approximately 95 ft in diameter
• Mow over design – bury flush with the ground
• Waterproof
• Moles and gophers are chased away unharmed
• One spike covers up to 7.500 sq ft
• Requires 3 D batteries (not included).

More Info:

Removable Battery Sleeve

• The mole and gopher sonic spike is designed with a convenient removable battery sleeve for trouble-free battery replacement. A Spike will work for 4 – 6 months on one set of alkaline batteries*. Spike must be used continuously for 7-14 days before moles and gophers start to move away from the area.

Proper Placement

• Be sure to insert the Spike into the soil so that the cap is flush with the ground to avoid tripping hazards and the chance of hitting it with a lawnmower. Effectiveness depends largely upon soil type: dry. sandy or peat soil does not conduct the sonic waves easily. Moist clay is the best conductor of sound.

How to Use

• STEP 1 – To open. unscrew YELLOW cap counter-clockwise.
• STEP 2 – Remove battery cartridge and insert batteries. Re-insert the battery cartridge into the Spike. If installation is correct. you will hear vibrating sound within 15 seconds.
• STEP 3 – Tighten the cap securely to keep moisture out.
• STEP 4 – Make pilot holes prior to inserting the Mole & Gopher Sonic Spikes. Do not hammer the Spike into the ground. as this could cause damage.
• STEP 5 – Insert Spike until the bottom of the cap begins touching the ground.
• STEP 6 – Insert Spike completely in the ground. This will prevent damage from a lawnmower. Insert the Spike with the cap flush with the ground. Above the ground. it could be a tripping hazard. Remember where the Spike is located so it may be removed for battery replacement.
• STEP 7 – Remove Sonic Spike during flooding and before ground freezes.WARNING: This product can expose you to chemicals including lead and lead compounds which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to